Successful meeting to solve Smart Anycut questions and doubts at Gaborone .

Well done Botswana Team.

Trainer & Speaker -
 Mr. Divyesh Bardoliwala


Team Members -
 Mr. Nirav Vakhariya

 Mr. Mukesh
 Mr. Swarup
 Mr. Kamlesh
 Mr. Abel Chilindiza
 Ms. Bonno Difutswe
 Ms. Cynthia Bodika

Total 15 companies in Gabarone, Botswana attended this special knowledge questions and doubts solving conference at Aurostar.

Some of them are:
  • Ankit Gems
  • Auro Star
  • Dalumi
  • De Beers
  • Dhruv Diamond
  • FineStar
  • KG MFG
  • KGK Diamonds
  • M.Suresh
  • Pluczenik
  • Rosy Blue
  • Star Rays
  • Tache Diamond
  • WDM
  • Zebra Diamond

Agenda: New upcoming Technologies in Diamond Manufacturing from LEXUS

Namibia1
Namibia2
Total 12 companies in Windhoek Namibia attended the special knowledge conference @ Ankit gems Namibia.

Some of them are:
  • Ankit Gems
  • Diacore
  • Dus Diamonds
  • Parishi Diamonds
  • StarRays
  • M Suresh
  • Kappu Gems
  • Grand View Diamonds
  • KGK Diamonds
  • Finestar Diamonds

Agenda: Factory visits of the Director Mr. Utpal Mistry

StarRays1
StarRays2
Star Rays Botswana personal training program


BlueStar2
BlueStar1
Aurostar personal training program


KGK1
KGK2
KGK Factory visit of the Director Mr. Utpal Mistry


BlueStar1
BlueStar2
Common Conference for all in Botswana for new upcoming technologies

Agenda: Knowledge sharing to improve Fancy Cut Diamond planning

KapuGems1
KapuGems2
Jay and Raju Bhai discussing about the fancy shape light performance. And Kapu gems team are asking how to get better performing diamond and how to incresase M-Box speed

The conference started with:
  • Discussion on how we can obtain most profitable solution and what are the criteria to be taken care while planning.
  • How can we control slope angles for fancies using Smart Anycut.
  • Uses and benefits of Digital adaptive lights on M-Box.
  • How can we improve plotting speed on M-Box with the help of Digital Adaptive lights?
  • How to consistently reproduce good performance diamonds using Galahad.
  • How to Judge grading color as well as face up color
  • Comparison between M-Box cavity plotting and X-ray cavity plotting and discussed how X-ray is more accurate then M-box.
  • How to judge solution grading colour & face up colour using DZ Light

Agenda: Knowledge sharing to improve Fancy Cut Diamond planning

M.Suresh1
M.Suresh2
Utpal explained the advantage of using GoodWin and HPC-AnyCut to M. Suresh’s team

The conference started with:
  • Why the manufacturing team and the Mumbai sales office are not on the same page while communicating about Fancy Cut diamond’s look?
  • Understanding ASET color representation. Why ASET image cannot completely define optical look of a diamond?
  • Why rectangular parameter limits cannot be used to define optical performance of a diamond? Why simple 2D charts are also not sufficient?
  • How GoodWin and SMART AnyCut can be used to achieve an optimum solution with the best possible make, while receiving high yield?
  • How to judge solution grading colour & face up colour using DZ Light
  • How CutwiseLive unit can be used to communicate within the team and stay on the same page while using the same language?
  • Introduction to Cutwise Cloud for objectively assessing diamond’s optical performance, while checking the Lab grade color and table up color, to select most profitable and sellable solution.
  • How the planned solution can be reproduced using GALAHAD Compass?
  • Upload final polish diamond DiBox2.0 data to evaluate optical performance, and make the data available for prospective buyers.

Agenda: Planning and Manufacturing Guideline for high-performance Fancy cuts and Value addition while planning

Laxmi1
Laxmi2
Nilesh explained how SMART AnyCut works to evolve the Fancy Shape diamond planning

The conference started with:
  • How Fancy Cut diamonds are graded? What are the criteria that need to be considered for manufacturing best performing Fancy cut diamonds?
  • How to use GOODWIN Cut with HPC AnyCut?
  • How to judge solution grading colour & face up colour using DZ Light
  • Discuss the parameter range for RBC and Fancy cut diamond.
  • Introduction to CutwiseLive unit, a useful instrument to communicate with sellers as well as with the buyers.
  • Introduction to Cutwise Cloud for objectively assessing diamond’s optical performance.

Agenda: Planning and Manufacturing Guideline for high-performance Fancy cuts and Value addition while planning

FineStar1
FineStar2
Nanjibhai interacting with Nilesh

The conference started with:
  • Understanding ASET image. Why a diamond with a weaker ASET image can still offer better optical performance?
  • Use of ASET only during new Cut design. Why it cannot be used for judging the optical performance of a diamond?
  • How AGS ASET is different from GIA grading system? Understanding FACETWARE and parameter guide charts.
  • How to judge solution grading colour & face up colour using DZ Light
  • Understanding how different parameters influence the overall optical performance of a diamond.
  • Understanding the optical performance of a diamond while viewing it from different directions and different distances.
  • How to maximize weight recovery and improve Diamond performance using GoodWin and HPC AnyCut software? How GoodWin is different from ASCII?
  • Introduction to CutwiseLive unit, a useful instrument to communicate within the team.
  • Introduction to Cutwise Cloud for objectively assessing diamond’s optical performance.

Agenda: Introduction of Carbon Planning platform to improve Optical performance of Fancy cut diamonds, and at the same time improve the yield

Shivam1
Shivam2
Utpal & Nilesh discussed various aspects of planning with Nikunj, Sanjay and Shivam’s team.

The conference started with:
  • Why GoodWin is required? How it is different from ASCII?
  • What are the current challenges while planning a high performance Fancy Cut diamonds in a rough piece? How to stay consistent?
  • What are the challenges faced in communication between the sales team and manufacturing team?
  • How to judge solution grading colour & face up colour using DZ Light
  • Common language under repeatable environment. Solution thru CutwiseLive.
  • Understanding AGS ASET, and decode the color representation.
  • What is Light leakage in diamonds and how it can be reduced?
  • How using GoodWin cut and HPC AnyCut one can improve the quality of diamonds manufactured, at the same time improve yield?
  • Introduction to Cutwise Cloud for objectively assessing diamond’s optical performance.

Agenda: How to use SMART AnyCut and GALAHAD Compass to improve output?

Ankit1
Ankit2
Nilesh, from Lexus, explains the Optical performance characteristics of a polished diamond.

The conference started with:
  • Criteria defining the look of a polished diamond. What should the manufacturing team consider while cutting excellent cut diamonds?
  • Discussion on parameter range of RBC and fancy cut diamonds.
  • How to plan a maximum yielding diamond using GoodWin cut and HPC AnyCut?
  • How GoodWin is different from ASCII?
  • How to judge solution grading colour & face up colour using DZ Light
  • How using a combination of Galahad and AnyCut, one can simplify the manufacturing process?
  • Introduction to CutwiseLive unit, a useful instrument to communicate with Mumbai sales office, to stay on the same page.
  • Introduction to Cutwise Cloud for objectively assessing diamond’s optical performance.

Agenda: How to improve Fancy Cut diamond Planning, maximizing the mass recovery, while optimizing the cut for best optical performance?

DDPL1
DDPL2
Hitesh from Dharmanandan Diamonds motivated the team to stretch their limits

The conference started with:
  • Pushing solutions in a high-value rough diamond to the next size limit
  • Introduction to the different parameters that affect the overall performance of diamonds.
  • What is leakage of light in diamonds and how can it be reduced?
  • How to plan a maximum yielding diamond using GoodWin cut and HPC AnyCut? How GoodWin is different from ASCII? Which parameters can be controlled in GoodWin?
  • How to judge solution grading colour & face up colour using DZ Light
  • How using a combination of Galahad and AnyCut one can simplify the manufacturing process of Diamond? How effectively Galahad can be used for polishing fancies?
  • While CutwiseLive unit is already used by DDPL’s sales team, how it can be used by the manufacturing team, and create the correct communication language.
  • Uploading solutions on Cutwise Cloud to objectively assess diamond’s optical beauty.

Agenda: Planning and Manufacturing Guideline for high-performance Fancy cuts and Value addition while planning Fancy Shape diamonds:

StarRays1
StarRays2
Nilesh from Lexus is answering questions from Star Rays’ senior planning team.

The conference started with:
  • What are the difficulties faced in communication between the sales team and the manufacturing team?
  • How can they use the same language while discussing the plan to be executed?
  • What is leakage of light in diamonds and how can it be reduced?
  • How to plan a maximum yielding diamond using GoodWin cut and HPC AnyCut? What is GoodWin? How it is different from ASCII file format?
  • How using the combination of Galahad and AnyCut one can simplify the manufacturing process of Diamond?
  • Introduction to CutwiseLive unit, a useful instrument to communicate without adding to confusions and conflicts.
  • How to judge solution grading colour & face up colour using DZ Light
  • Introduction to Cutwise Cloud for objectively assessing diamond’s optical performance.

Agenda: Planning And Manufacturing Guideline For High-Performance Fancy Cuts And Value Addition

KGK
KGK
KGK

The conference covered the following subjects:
  • WHY this new knowledge was required?
  • WHAT are the current challenges?
  • How these challenges could be overcome?

Click the following links to find more...

PRESENTATION – Click Here
Semi Polish – Example 1 | Example 2
Rough Colorless – Example 1
Fancy Color – Example 1